Materials & Installation

Matte and soft textured surface, Removable material, Thick and durable, Wipeable, Works with most surfaces, Requires adhesive

Smooth matte surface, Removable material, Wipeable, Durable, Easy to apply – just peel and stick

▶︎1. Wall Preparation : Ensure the wall is clean, dry, and smooth, Remove any old wallpaper completely, Fill cracks or holes and sand the surface, Apply primer if necessary (especially for plaster surfaces) ▶︎2. Panel Measurement : Make sure patterns align if using patterned wallpaper ▶︎3. Applying Adhesive : Apply paste to either the wall or the back of the paper (follow product instructions), If applied to the paper, wait a few minutes to let the adhesive absorb (known as “booking time”) ▶︎4. Hanging the First Panel : Align the first panel with a vertical level line (use a level tool), Apply from top to bottom, smoothing out air bubbles with a plastic spatula ▶︎5. Adding More Panels : Overlap each panel by about 1 inch, Apply each one carefully, following the same process ▶︎6. Trimming Excess : • Trim extra wallpaper along the ceiling and baseboards ▶︎7. Cleaning : Wipe off any excess glue with a damp sponge immediately, Let it dry in a ventilated room, avoiding direct sunlight or strong airflow

▶︎1. Wall Preparation : Surface must be clean, dry, and smooth, Avoid dusty, oily, or textured areas, Wait 3–4 weeks after painting before application ▶︎2. Aligning the First Panel : Start from the left side of the wall, Draw a vertical guide using a level tool ▶︎3. Peeling the Backing: Peel a few inches of the backing from the top, Align carefully and begin sticking to the wall ▶︎4. Applying Downward: Slowly peel down the backing while smoothing with a spatula or cloth, Push air bubbles from the center outward ▶︎5. Pattern Matching: Align designs between panels, Overlap each panel by about 1 inch for seamless look ▶︎6. Trimming Excess, Trim carefully around ceiling, baseboards, or outlets